How to spawn the Ender Dragon

After reaching the dimension of the End in Minecraft and defeating the dragon that defended it, you have decided to continue your exploration in search of new adventures. By comparing with your friends, however, you learned that the End dragon can be summoned several more times, so you can earn tons of valuable experience points.

Intrigued by the news you received, you decided to search the web for how to spawn the Ender Dragon and thus launch yourself again in the epic battle with this boss. Fortunately for you, you have come to this guide of mine, in which I will show you how to perform this procedure both through a specific Minecraft mechanic and through the use of the command console.

All you have to do is sit comfortably and pay attention to the advice I will give you, in order to be sure that you will succeed in your intent to summon the dragon that protects the End! How about starting immediately? Perfect! You will find all the information you need in the next chapters. I just have to wish you a good read and, above all, a good time!

Index

• How to spawn the Ender Dragon
  • Collect materials
  • Place the crystals
• Command to spawn the Ender Dragon

How to spawn the Ender Dragon

The Enderdrago is a creature that defends the gates of the End and can only be found in this location. Don’t you know what End is? It is a dark dimension immersed in the void, characterized by a ring of islands, in the center of which there is a smaller one, defended by the Enderdrago. By defeating the latter, a portal is activated that allows you to reach the outer ring of islands, to continue your adventure.

You can understand that if you want to spawn the Enderdrago, you must first reach the End, to see it in front of you. You don’t have to do anything, because this enemy will already be there defending the gates of the End and ready to test your skills. You will be able to reach this dark dimension only by crossing the Portal of the End, a “door” that connects the two worlds, which I told you about in my guide dedicated to the subject.

That said, after you have defeated the Enderdrago, you will be able to summon the latter and defeat it again: a useful operation to obtain a large amount of experience points. You can do this by following the procedures that I will show you in the next chapters.

Collect materials

Before explaining, in practice, how to summon the Enderdrago again after defeating it the first time, it is important that you know the materials you will need to achieve your goal. The items you will need to own are 4 End Crystal units, so you will have to struggle a little to get them back.

These crystals are obtained by placing 7 units of Glass, 1 unit of Ender’s Eye and 1 unit of Ghast’s Tear inside a workbench. The glass is a fairly simple resource to obtain, as it derives from the processing of sand in the furnace. I have explained to you in detail how to get this resource in my guide on how to make glass in Minecraft.

As for the Eye of Ender, however, it is obtained by combining 1 unit of Ender’s Pearl along with 1 unit of Blaze’s Dust in a workbench. The Pearl of Ender can be found by defeating the Endermans or inside the chests located in the underground Fortresses.

The Blade Powder comes from Blaze Verga, a resource that you can recover after defeating the Blaze in the Nether. If you don’t know what the Nether is, you can find all the information you need to access it in this guide of mine dedicated to the subject.

Finally, the other material you will have to patiently search for is the Tear of Ghast. This resource is obtained after defeating the Ghasts , creatures that float in the air within the dimension of the Nether. Given the nature of this place, you will have to strive to ensure that the Tear of Ghast, which you will obtain after defeating this creature, does not fall into the lava, making it difficult for you to collect it.

Place the crystals

Now that you have all the materials and have crafted the End Crystals, it is time to proceed with summoning the Enderdrago. What you need to do is go back to the End, through the End Portal that you had previously activated.

Once this is done, on the islet where you defeated the Enderdrago, in the center, you will find a small pillar with torches on the sides: this represents the portal to return to the main world of Minecraft, but it can also be used for the summoning of the dragon.

The base of this portal is made up of four sides made up of 3 units of Bottom Rock. You must, therefore, place 1 End Crystal unit in the center of each of the four sides in order to activate the dragon’s summoning. You can notice that the procedure was successful from the light rays reaching the sky and from the lateral obelisks that reactivate, to give life to the Enderdrago.

Command to spawn the Ender Dragon

In addition to the method I indicated in the previous chapter, you can also use commands to type in the appropriate console, which will allow you to summon the Enderdrago. What you need to do is, first of all, enable the cheats in the world of Minecraft, which is essential for you to be able to type the command strings.

To do this, if your intention is to create a new world, in the main menu click on the items Single player> Create a new world and go to Other world options. Make sure, therefore, that the Commands item is set to Yes and press the Done and Create a new world buttons, to start a new game session with command support.

If, on the other hand, you want to enable cheats in an already created world, open the game menu and click the Open in LAN button. Among the items that are shown to you, make sure that the one named Commands is set to Yes. Once this is done, click on the Start the world on LAN button, to enable the tricks.

After enabling the command console in Minecraft, it’s time to summon the Enderdragon: to do this, simply press the key that opens the chat panel ( T ) and type the string / summon minecraft: ender_dragon, followed by pressing of the Enter key. By doing so, the Enderdrago will appear and start flying near your avatar’s location.

In addition to this command, you can also set additional parameters, such as the XYZ coordinates where you want the dragon to appear. To the command that I have indicated to you, you must add the numerical values ​​of the coordinates (instead of the letters X , Y and Z ): / summon minecraft: ender_dragon XYZ.

In addition, you can also add tags after typing the coordinates, to customize the summoning. For example, using the {DragonPhase: 9} tag will summon the Enddragon in the last phase, just as if you had already defeated it, while {NoAI: 1} will create an inanimate and completely helpless copy of the dragon.

 

Source: aranzulla by https://www.aranzulla.it/ The article has been translated (Powered by Google Translate) based on the content of aranzulla by https://www.aranzulla.it/. If there is any issue regarding the content, copyright; please report below the article. We will try to process as quickly as possible to protect the rights of the author. Thank you very much! We just want readers to access information more rapidly and easily with other multilingual content, instead of information only available in a certain language. We always respect the copyright of the content of the author and always include the original link of the source article. If the author disagrees, just leave the report below the article, the article will be edited or deleted at the request of the author. Thank you very much!