How Do I Turn On My DJI Mini 2 Controller? Step-by-Step Guide

May 18, 2023 Madelyne 0 Comments DJI Avata

Are you excited about exploring the world from above with your DJI Mini 2 drone? As you embark on your aerial adventures, it’s essential to familiarize yourself with the various components of your drone setup, including the controller.

One of the fundamental steps in getting your drone ready for flight is knowing how to turn on the DJI Mini 2 controller.

The controller serves as your primary interface to navigate and control your drone’s movements. With its intuitive layout and ergonomic design, the DJI Mini 2 controller offers a comfortable and user-friendly experience.

Whether you’re a beginner or an experienced drone pilot, understanding this process will ensure a seamless and enjoyable flying experience.

Table of Contents

Step 1: Inspect the Controller

Before we dive into the process of turning on the DJI Mini 2 controller, let’s take a moment to inspect its physical features. The controller is a crucial tool that allows you to navigate your drone and control its movements. Familiarizing yourself with the controller’s layout will help you locate the necessary buttons and switches with ease.

Step 2: Powering On the Controller

To turn on your DJI Mini 2 controller, follow these simple steps:

Locate the power button on the controller. It is usually found on the top left corner, marked with a power symbol.
Press and hold the power button for a few seconds until the controller’s status indicators start to flash or illuminate. This indicates that the controller is powered on.
Once the status indicators stabilize or stop flashing, your DJI Mini 2 controller is successfully powered on and ready for use.

Step 3: Linking the Controller to the DJI Mini 2 Drone

Now that your DJI Mini 2 controller is powered on, the next step is to establish a connection between the controller and the drone. Follow these instructions:

Turn on your DJI Mini 2 drone by pressing the power button located on its body.
Ensure that the drone is in an open area and within range of the controller.
On the controller, look for the control sticks and toggle switches. The control sticks are used to maneuver the drone, while the toggle switches control features like flight modes and camera settings.
Push the left control stick upwards and then downwards to calibrate the drone’s compass. This step ensures accurate flight control and stability.
Once the drone’s compass is calibrated, look for the pairing button on the drone. It is usually located on the side or underneath the aircraft.
Press and hold the pairing button until the status indicators on both the controller and the drone begin to blink rapidly.
After a few moments, the blinking status indicators should stabilize, indicating a successful connection between the controller and the drone.

Step 4: Verifying the Connection

To ensure that the connection between your DJI Mini 2 controller and drone is established correctly, perform the following checks:

Look for the connection status icon on the controller’s display. It should indicate a stable connection with the drone.
Gently move the control sticks on the controller and observe if the drone responds accordingly. The movement of the sticks should result in corresponding movements of the drone.
Check the live video feed on the controller’s display. You should be able to see the drone’s camera feed in real time.

Troubleshooting Tips– Controller Not Working

While turning on your DJI Mini 2 controller should be a straightforward process, there might be instances where you encounter issues or the controller doesn’t work as expected.

If you find yourself in such a situation, don’t worry. Here are some troubleshooting tips to help you resolve common problems with the controller.

1- Check the Battery

The first thing to do if your DJI Mini 2 controller is not working is to check the battery level. Ensure that the controller has sufficient charge to power on and establish a connection with the drone. If the battery is low, charge it using the provided USB cable and a power source.

2- Restart the Controller

Sometimes, a simple restart can resolve minor glitches or software issues. Try turning off the controller and then turning it back on. Press and hold the power button until the controller powers off, and then press it again to turn it back on. This simple step might rectify any temporary issues.

3- Check Controller and Drone Firmware

Incompatibility between the controller and the drone’s firmware can cause connectivity issues. Make sure that both the controller and the DJI Mini 2 drone are running the latest firmware versions. Visit the official DJI website or use the DJI Fly app to check for available updates and follow the instructions to update the firmware if necessary.

4- Re-establish Connection

If the controller is not connecting to the drone, you can try re-establishing the connection by following these steps:

Turn off both the controller and the drone.
Power on the drone first and wait for it to initialize properly.
Power on the controller and ensure that it is in pairing mode.
Follow the steps mentioned in the previous section (Step 3) to link the controller and the drone again.

5- Check for Interference

Interference from other devices or strong radio signals in the vicinity can disrupt the connection between the controller and the drone. Ensure that you are flying in an area with minimal interference. Avoid locations near power lines, strong Wi-Fi signals, or other sources of electromagnetic interference.

6- Reset Controller Settings

If the above steps don’t resolve the issue, you can try resetting the controller’s settings to default. Keep in mind that this will erase any customized settings or preferences you have made.

To reset the controller, look for a small reset button (usually located inside a pinhole) on the controller. Use a small pin or paperclip to press and hold the reset button for a few seconds. Afterwards, attempt to power the controller and connect it to the drone again.

7- Contact DJI Support

If you have exhausted all the troubleshooting steps and your DJI Mini 2 controller is still not working, it is recommended to reach out to DJI support for further assistance. They have a dedicated team of experts who can provide specific guidance based on your situation and help you resolve any hardware or software-related issues.

Remember, troubleshooting steps may vary depending on the specific problem you’re experiencing. Always refer to the official DJI documentation, and user manual, or contact their support for the most accurate and up-to-date information.

FAQs

Q1: How long does it take to turn on the DJI Mini 2 controller?

A1: The process of turning on the DJI Mini 2 controller is usually quick. After pressing and holding the power button, the status indicators will typically stabilize within a few seconds, indicating that the controller is powered on and ready to use.

Q2: Can I use the DJI Mini 2 controller with other DJI drones?

A2: No, the DJI Mini 2 controller is specifically designed for use with the DJI Mini 2 drone. It may not be compatible with other DJI drone models. Always refer to the product documentation or contact DJI support for compatibility information.

Q3: What if the status indicators on the controller keep flashing even after powering it on?

A3: If the status indicators on the DJI Mini 2 controller continue to flash rapidly instead of stabilizing, it may indicate an issue. Try restarting the controller and ensuring that it is fully charged. If the problem persists, consult the user manual or contact DJI support for further assistance.

Q4: Why is my DJI Mini 2 controller not connecting to the drone?

A4: There could be several reasons why the DJI Mini 2 controller is not connecting to the drone. Common causes include low battery levels, outdated firmware, signal interference, or a faulty connection. Refer to the troubleshooting steps outlined in this article to address these issues.

Q5: Is it necessary to calibrate the drone’s compass before connecting the controller?

A5: Yes, it is recommended to calibrate the drone’s compass before connecting the controller. Calibration ensures accurate flight control and stability. Follow the instructions in the user manual or DJI Fly app to properly calibrate the compass.

Q6: Can I reset the controller to its factory settings?

A6: Yes, you can reset the DJI Mini 2 controller to its factory settings. Locate the reset button (usually found inside a pinhole) on the controller and press and hold it for a few seconds. Keep in mind that resetting the controller will erase any customized settings or preferences you have made.