How to polish your car headlights

A comprehensive guide on how to Polish your car headlights

Enhance your driving experience with our step by step guide on how to Polish your car headlights. Discover tips and Recommended topnotch products to restore brightness and clarity and bid farewell to dullness. Enhanced aesthetics of your vehicle and make sure the maximum Visibility on the road. When it comes to illuminating the aesthetic appeal of your car then polishing your headlights can make a world of difference.

Car headlights today are mostly made of polycarbonate. This plastic has a number of undeniable advantages over glass, but over time it becomes cloudy and yellow. We will tell you how to return it to its original appearance.

Polycarbonate headlights are cheaper to manufacture and allow for more complex shapes than glass ones. However, plastic inevitably fades, turns yellow and becomes scratched, which negatively affects the appearance of the car. Fortunately, you can skip buying new headlights and simply polish the polycarbonate.

Here are three well-known ways that you might find useful. The first and easiest is to polish with toothpaste. The method is quite effective, but the effect is very short-lived. Another option is polishing with an insect repellent based on diethyltoluamide. In this case, the benefits will also be noticeable, but not for long. In addition, its chemical composition has a negative effect on plastic.

Also Read: Electric hypercar Deus Vayanne promises 2200 horsepower

The second method is polishing with drill bits and special polishes. It takes time and patience, but the result is quite noticeable and lasts for a long time. The third and most difficult method is polishing with sandpaper. To do this, you need paper of three-grain sizes. You need to start polishing with the largest grain, moving horizontally.

After that, the paper with the medium grain is taken, and the movements should now be vertical. Then you need a paper with a fine grain, which is used for finishing polishing – again with horizontal movements. Between them, the surface of the car headlights should be moistened with water and wiped with a microfiber towel. Finally, the polycarbonate needs to be treated with a degreaser and a protective plastic spray applied.

FAQ’s

What is the best way to Polish car headlights?

You should apply a huge amount of window cleaner to the Car headlights and let it soak for a few seconds. After that use of microfiber cloth to Wipe off the window cleaner from the headlight. At last use another clothes to apply the Polish and then drop the surface of headlight strongly in a circular manner.

Does headlight polishing really work?

Yes restoration kits absolutely work because it is very much DIY project that you can do it in your driveway or garage. After using these kits you are going to see the much better sight.

How do I permanently restore my headlights?

To permanently restore headlights you are going to require to sand off the oxidised layer from the lens and then apply a new UV coating.

Leave a Reply

Your email address will not be published. Required fields are marked *